Defiant IS13a10508WD-BZ Guide De Démarrage Rapide page 2

Operation (continued)
4
Adjusting the SENSITIVITY
control
□
To increase the sensitivity, turn the "SENS"
control clockwise.
□
To decrease the sensitivity, turn the "SENS"
control counterclockwise.
NOTE: The motion sensor (C) is more sensitive to motion
moving across the front of the sensor. The motion sensor
(C) is less sensitive to motion moving directly toward the
front of the sensor.
NOTE: The higher the "SENS" setting, the greater the
possibility of false triggering. To reduce false triggering,
please choose the sensitivity you need.
5
Adjusting the TIMER control
NOTE: The "TIMER" control determines the amount of time
the light will stay on full bright after all motion has stopped.
□
Auto mode: After all adjustments are complete, turn the "TIMER" control clockwise and select a time from
3~12 minutes. The light will only work at night after a time has been selected.
□
Manual Override mode: When the light is on and setting the " TIMERS" at 3~12 minutes position, if you
quickly switch "OFF-ON-OFF-ON" within 3 seconds, the light will enter the "Manual Override" mode.
In this mode, the light will keep on around 5.5 hours and then return to "Auto" mode and work according
to your setting 3~12 minutes. If you don't want keep "Manual Override" mode, switching for more than 5
seconds before switching on, the light will restart.
Please contact 1-866-308-3976 for further assistance.
HOMEDEPOT.CA