Publicité
2. Insert dust cover into the rackmount ear screw holes that are not being used.
Step 2: Install the power module on the rack
1. Place the power module on a flat stable surface with the front of the unit facing toward you. Secure the
power module to your rack with four M5X12L screws at the front of the rack.
2. Once completed, perform the same steps for the external battery pack.
CAUTION! The external battery pack must be installed below the Power Module.
VERTICAL / TOWER INSTALLATION
Step 1: Rotate the multifunction LCD module
1. Unscrew the right panel of the Power Module. Separate the right panel from Power Module.
- 5 -
Publicité
