Télécharger Imprimer la page

Conceptronic ZEUS51E6K Guide D'installation Rapide page 4

Publicité

◼ When changing batteries, replace with the same quantity and the same type of batteries.
◼ Do not attempt to dispose of batteries by burning them. It could cause explosion.
◼ The UPS may be connected to external battery package. Proper disposal of batteries is required. Refer to
your local codes for disposal requirements.
◼ Do not open or destroy batteries. Effluent electrolyte can cause injury to the skin and eyes. It may be toxic.
◼ Replace the fuse only by a fuse of the same type and of the same spec in order to avoid fire hazards.
Transport
◼ Please transport the UPS only in the original packaging to protect against shock and impact.
Storage
◼ The UPS must be stockpiled in the room where is ventilated and dry.
Disposal of waste electrical equipment and batteries: Do not dispose of waste electrical
equipment and batteries with household waste. Please hand them to your local recycling
point. Batteries should be fully discharged when disposed of. Incorrect storage/disposal can
harm the environment and/or cause injury.
CE marking: Conceptronic declares that this product complies with the directives listed in the
section 'Declaration of Conformity'.
The system must be installed and wired only by qualified electricians in accordance with applicable
safety regulations!
For safety, please cut off the mains power switch before installation!
When installing the electrical wiring, please note the nominal amperage of your incoming feeder.
UNPACKING
CAUTION! Inspect the appearance of the UPS to see if there is any damage during transportation. Do not
turn on the unit and notify the carrier and dealer immediately if there is any damage or lacking of some parts.
RACKMOUNT INSTALLATION
Step 1: Rackmount ears installation
1. Attach the two rackmount ears to the power module using the provided screws M4X8L*8pcs.
INSTALLING YOUR UPS SYSTEM
- 4 -

Publicité

loading