Publicité
GB
2
WARNING! THIS IS NOT AN INDUSTRIAL SAFETY HELMET
This bump cap does not provide protection against the effects of falling or
thrown objects, or moving suspended loads. It should not be used instead of
an Industrial Safety helmet as specified in EN 397. This bump cap is made
to absorb the energy of a blow by partial destruction or damage to the shell
and the harness, if fitted, and even though such damage may not be readily
apparent any bump cap subjected to severe impact should be replaced.
For adequate protection the bump cap must fit or be adjusted to the size
of the users head. The attention of the user is also drawn to the danger of
modifying or removing any of the original component parts of the bump cap,
other than recommended by the manufacturer. Bump caps should not be
adapted for the purpose of fitting attachments in any way not recommended
by the bump cap manufacturer. Do not apply paints, solvents, adhesive or
self-adhesive labels except in accordance with the instructions from the
bump cap manufacturer.
For further information or for EU/EC (as applicable) Declaration of
Conformities, please visit our web site centurionsafety.eu
PPE Regulation (EU) 2016/425 or PPE Directive 89/686/EEC: EU/EC (as
applicable) Type-Examination by: BSI Group The Netherlands B.V., Say
Building, John M. Keynesplein 9, 1066 EP, Amsterdam, The Netherlands
(Notified Body No 2797) or BSI Assurance UK Ltd, Kitemark Court, Davy
Avenue, Knowlhill, Milton Keynes MK5 8PP, UK (Notified Body No. 0086).
Publicité
