Publicité
ENGLISH
recommended that it be cleaned with hot water and a non-corrosive detergent every two
months.
Do not use abrasive detergents. Otherwise, the surface of the kitchen hood may be
-
damaged.
Keep the motor and other parts away from water, as water may damage the appliance.
-
The carbon filter must not be exposed to heat.
-
Cleaning aluminium filters
Do not use corrosive detergents to clean grease from the aluminium filters. Regular cleaning
of the aluminium filters will prolong the life of the appliance and keep it in good working order.
Use one of the following cleaning methods:
Cleaning method 1:
Immerse the aluminium filters in hot water (40-50 °C), add neutral detergent and let them
soak for 2 to 3 minutes. Protect yourself with gloves and clean the filters with a soft brush
or scouring pad. Do not apply too much force, as filters are very delicate and can be easily
damaged.
Cleaning method 2:
If you wish, you can also wash the filters in the dishwasher at a temperature of approx. 60 °C.
Carbon filter
This type of filter has activated carbon and purifies air and absorbs cooking odours. The
activated carbon becomes saturated after a period of time, which will reduce the adsorption
capacity of the filter. The carbon filter cannot be washed nor cleaned in any way.
When the kitchen hood is used regularly, the activated carbon filter should be replaced every
2-3 months. If frying more frequently, shorten this interval.
1.
Remove the aluminium filters. Fig. 10
2.
The carbon filters are located on both sides of the motor. Turn the filters, until they
are firmly in place. Fig. 11
3.
To replace the carbon filters, proceed in reverse order.
50
BOLERO FLUX ICT 388000 INOX A++
BOLERO FLUX ICT 388000 BLACK A++
Publicité
