- Pay attention to sharp edges inside the kitchen hood,
especially during installation and cleaning.
- Make sure that the duct does not have bends sharper than
90 degrees, as this will reduce the efficiency of the kitchen
hood.
- WARNING: failure to install the screws or fastening device in
accordance with these instructions may result in electrical
hazards.
- WARNING: before accessing the electrical terminals, all
power supply circuits must be disconnected.
- There must be adequate ventilation of the room when the
kitchen hood is used at the same time as gas or other fuel
burning appliances.
- Caution: the appliance and its accessible parts may become
hot during operation. Be careful not to touch any accessible
parts. Children under 8 years old must stay away, unless
they are supervised.
- Local air discharge regulations must be complied with.
- For safety reasons, only use the supplied fixing or mounting
screws (if applicable, depending on the model) or screws
of the same size as those recommended in this instruction
manual.
- You must not use a steam cleaner.
- Never try to put out the fire with water. Instead, turn off the
appliance and smother the flame with, e.g., a fireproof lid or
blanket.
- Never use extension leads, multiple socket connections or
external timer connection elements.
- If the power cord is damaged, it must be replaced by the
official Cecotec Technical Support Service or by similarly
qualified technicians to prevent hazards.
- The appliance must not be operated if the power supply
cable is damaged or cut.
10
BOLERO FLUX ICT 388000 INOX A++
BOLERO FLUX ICT 388000 BLACK A++