Publicité
3. Assembly parts (with the small model as example)
1 – Front plate
2 – Floor plate
3 – Side plate
4 – Side plate
5 – Back plate
6 – Upper plate
7 – Transparent acrylic cover
8 – Transparent acrylic front cover
9 – Lamp socket with line (x1)
10 – Short screw (x4)
11 – Long screw (x28)
12 – Cable holder (x1)
13 – Shaft (x2)
4. Assembly instructions (with the small model as example)
•
Fix the lamp socket with two short screws to the upper plate. Use the line holder and 2 short
screws to fix the cable as shown in figure A.
•
Remove the protective film from the acrylic covers (7, 8). Use a screwdriver to fix the two shafts
(figure C) to the acrylic cover (7), as shown in figure B.
EN
Publicité
