Publicité
EN
OVERVIEW
The GWN7832 is Layer 3 aggregation managed network switch that allows medium-to-large enter-
prises to build scalable, secure, high performance and smart business networks that are fully manage-
able. It provides 12 SFP+ optical ports with a maximum switching capacity of 240Gbps. It supports
advanced VLAN for flexible and sophisticated traffic segmentation, advanced QoS for prioritization
of network traffic, IGMP/MLD Snooping for network performance optimization, comprehensive secu-
rity capabilities against potential attacks. GWN7832 can be managed in a number of ways, includ-
ing the local Web user interface of the GWN7832 switch and CLI, the command-line interface. And
also supported by GWN.Cloud and GWN Manager, Grandstream's cloud and on-premise network
management platform. With complete end-to-end quality of service and flexible security settings, the
GWN7832 is the best value enterprise-grade aggregation managed network switch for medium-to-
large businesses.
PRECAUTIONS
• Do not attempt to open, disassemble, or modify the device.
• Do not expose this device to temperature outside range of 0 °C to 45 °C for operation and -10 °C to
60 °C for storage.
• Do not expose the GWN7832 to environments outside of the following humidity range: 10-90% RH
(non-condensing) for operation and 10-90% RH (non-condensing) for storage.
• Do not power cycle your GWN7832 during system boot up or firmware upgrade. You may corrupt
firmware images and cause the unit to malfunction.
PACKAGE CONTENTS
1x GWN7832 Switch
1x Power Cord Anti-Trip
1x 1.2m (10A) AC Cable
PORTS & LED INDICATORS
Front Panel
1
2
Back Panel
13
Side Panel
4x Rubber
1x 25cm Ground
Installation Guide
Footpads
Cable
2x Rack Mounting Kits
8x Screws (KM 3*6)
3
4
9
10
12
11
14
~ 1 ~
No.
Port & LED
SFP+ 1-12
1
2
1-12
CONSOLE
3
4
RST
PWR
5
RPS
6
SYS
7
8
100-240VAC 50-60Hz
9
10
11
12
13
14
Fan
Note: External RPS (Redundant Power Supply) is sold separately.
1x Quick
LED Indicator
LED
Indicator
System
Indicator
5
6
7
Port
Indicator
8
PWR/RPS
Indicator
Description
12x 10Gbps SFP+ ports
SFP+ ports' LED indicators
1x Console port, used for connecting managing PC
Factory Reset pinhole. Press for 5 seconds to reset factory
default settings
Internal power supply LED indicator
Secondary external power supply LED indicator
System LED indicator
Grounding terminal
Power socket
Power cord anti-trip hole
External RPS power outlet
External RPS power cord anti-trip hole
External power supply rubber plug
2x Fans
Status
Description
Off
Power off
Solid green
Booting
Flashing green
Upgrade
Solid blue
Normal use
Flashing blue
Provisioning
Upgrade failed
Solid red
Flashing red
Factory reset
Off
Port off
Port with 10Gbps connected and there is no
Solid green
activity
Flashing green
Port with 10Gbps connected and data is
transferring
Solid yellow
Port with 1Gbps connected and there is no activity
Flashing yellow
Port with 1Gbps connected and data is
transferring
Off
Unused or failure
In use
Solid green
Overvoltage or undervoltage
Solid red
~ 2 ~
Publicité
