Jetson OTG ELITE JOTEG-BLK Mode D'emploi page 29

Securing the Front Reflector
1.6
1. ROTATE THE FRONT REFLECTOR CLAMP AROUND THE
HANDLEBAR UNTIL THE REFLECTOR IS FACING THE FRONT
OF THE BIKE.
2. SLIDE THE REFLECTOR TOWARDS THE CENTER OF THE
HANDLEBAR UNTIL THE REFLECTOR CLAMP FEELS
SNUG ON THE THICKER PART OF THE HANDLEBAR.
3. IF NECESSARY, TIGHTEN THE CLAMP ON THE HANDLEBAR
FURTHER BY TURN THE SCREW CLOCKWISE WITH THE
PHILLIPS-HEAD SCREWDRIVER.
PHILLIPS-HEAD
SCREWDRIVER TIP
(8)
FRONT REFLECTOR
SCREW
27