Télécharger Imprimer la page

Relita eLEONA Mode D'emploi page 9

Publicité

F
22 st.
1
1
Put the back panel of the bed on ground
facing backside and make sure that
there is nothing bellow the panel
3
4
Make sure that front panel of the bed
and back side panel of the bed are clean
from dust,dirt and oil.
5
5 Min.
Make sure that you apply the glue from
right side and wait 5min. for glue to cure.
6
Gently turn over all panels that you apply
glue on and place them on right possition.
EB 55741150
FUNKTIONSBETT eLEONA
2
5
7/ 11
Positioning and securing
of the bed side slats
glue
2
3
Put the front panel of the bed on ground
facing frontside and make make sure that
there is nothing bellow the panel
4
glue
Make sure that all panels that you need
to apply glue to are clean from dust,dirt
and oil and then apply glue on them.
7
Gently apply presure on the surface of the
panels and secure them with screws.
IMPORTANT:
Full cure time of the glue is 12 hours!

Publicité

loading