Publicité
Folding the Cutting Head of the
Attachment (Fig . 3b)
a. Ensure that the blade sheath is in place
and the battery pack is disconnected from
the power head.
b. Hold the handle, squeeze the locking lever
1 and 2 together, and hold them in position.
c. Fold the cutting head next to the shaft.
d. Release the locking lever 1 and 2.
To Remove/Install the Blade
Sheath (Fig . 4)
WARNING
blade sheath . Be careful of the blade and
protect your hands from being injured by
the blade .
WARNING
power head when you are assembling parts,
making adjustments, cleaning, or when the
product is not in use .
a. The hedge trimmer attachment is shipped
with the blade sheath installed. Before use,
slide the blade sheath off along the blade ridge and remove it.
b. After using and before storing or transporting the hedge trimmer, clean the blade and
insert the blade into the sheath.
Always wear gloves when
removing or installing the
Always remove the
battery pack from the
Fig . 3b
Cutting Head
Fig . 4
Blade Sheath
11
Publicité
