Reverse Sensor Head Products; Troubleshooting - BASETech 2162728 Mode D'emploi

e) Reverse sensor head products
Observe the following hints when painting over reverse sensor heads.
Painting of Reverse Sensor Heads
1
Caution! Please note that extreme care should be taken if you
decide to paint the reverse sensor heads to match the colour of
your vehicle.
• Some cleaning agents, solvents and certain paints may damage the heads and cause the
reverse sensors to malfunction. Also,placing too much paint on the reverse sensor heads
may affect functionality.
• Failure to adhere to the following recommendations may affect the function of your system
or stop it functioning altogether.
• The manufacturer and supplier will not be held responsible for any correction, replacement
or damage caused.
The following is our recommended painting procedure:
2
1. Do not use strong solvents for cleaning the heads.
2. Use a Flexi-Plastic Primer – one coat only.
3. For colour, use an Acrylic with Flex additive – maximum of 2 coats.
4. If required, use a Clear Acrylic final coat – single coat only.

8. Troubleshooting

In purchasing this parking aid, you have acquired a product which has been designed with state-
of-theart technology and is operationally reliable.
Nevertheless, problems or faults may occur.
For this reason, the following is a description of how you can eliminate possible malfunctions
yourself.
Always adhere to the safety instructions.
26