RADIO OPERATIONS
Listening to the radio
1
1
/I/ATT
2
F M
A M
3
To stop searching before a station is received, press the same button you have pressed
for searching.
To tune in a particular frequency manually:
1 Press FM or AM to select the band.
2 Press and hold
Now you can manually change the frequency while "M" is flashing.
3 Press
or
• If you hold down the button, the frequency keeps changing until you release the button.
4
3
Note on One-Touch Operation:
When you select a band in step 2 below, the power automatically comes on. You
do not have to press this button to turn on the power.
FM1
FM2
FM3
AM
Note:
When a cassette is in the cassette compartment, you cannot select the tuner. Be sure
to eject the cassette from the cassette compartment to listen to the radio.
To search stations
of higher
frequencies.
To search stations
of lower
frequencies.
or
until "M" starts flashing on the display.
repeatedly until the frequency you want is reached.
2
Turn on the power.
Select the band (FM1, FM2, FM3
or AM).
You can select any one of FM1, FM2, and
FM3 to listen to an FM station.
Start searching a station.
When a station is received, searching stops.