Publicité
Display
1. Power supply indicator 230
VAC
2. Input / output voltage and
frequency indicator
3. Load indicator
4. Charging current indicator
5. Settings menu
6. Menu controls
Controls
1. UP/DOWN - change settings
2. MENU - change the menu option
3. SET/EXIT - confirm setting or exit menu
4. ON/OFF - turn on or off the output
•
Use the up and down buttons to scroll between menus and parameters of the
inverter.
•
Press the SET/EXIT button to enter or exit changing value mode (Charging current
and Menu Setting).
•
Press and hold the MENU and SET/EXIT buttons for 3 seconds to restore factory
settings.
Menu setting
•
VOLT CYC - shows cycle charging voltage value
•
VOLT FLO - shows floating charging voltage value
•
VOLT CUT - shows low voltage protection value
•
VOLT WAR - shows low voltage warning value
•
BAT TYPE - use the up and down buttons to select battery type (LEA- lead-acid, gel
PO4- LiFe-PO4).
Battery mode: power cut; external device is supplied from battery.
Overheat. External device is automatically cut off.
Unusual/improper operation.
Owner's manual
①
②
③
④
⑥
⑤
17
EN
Publicité
