Assembly
Note: Remove all packaging material from the
product.
Fold out the supporting legs of the tree stand
at a 90°angle to each other and screw the wing
bolts
loosely into the drill holes provided for
4
this purpose (see Fig. A).
Remove the cover cap
Place the bottom section
and tighten the wing bolts
Then, place the middle section
of the bottom section
Insert the tree top
3
middle section
(see Fig. C).
2
Arrange all branches to your preferred display
(see Fig. D).
Double check that the stand
flat level surface, and the tightness of the wing
bolts
, so the product is securely fixed in
4
position.
Now you can decorate the tree (see Fig E).
Cleaning and care
Never use harsh cleaning products to clean the
tree. Instead, wipe it clean using a dry cloth.
Storing
Remove all decorations from the tree.
To disassemble the product, follow the instructions
in the "Assembly" chapter in reverse order.
Store all parts in the packaging.
Store the product in a cool, dry place.
Disposal
The packaging is made entirely of recyclable mate-
rials, which you may dispose of at local recycling
facilities. The product and packaging materials are
recyclable, dispose of it separately for better waste
treatment.
5
(see Fig. B).
6
in the tree stand
1
5
(see Fig. C).
4
in the opening
2
(see Fig. C).
1
into the opening of the
is placed on a
5
Contact your local refuse disposal authority for more
details of how to dispose of your worn-out product.
The product incl. accessories and packaging mate-
rials are recyclable and are subject to extended
producer responsibility. Dispose them separately,
following the illustrated Info-tri (sorting information),
for better waste treatment. The Triman logo is valid
in France only.
Warranty
The product has been manufactured to strict quality
guidelines and meticulously examined before delivery.
In the event of material or manufacturing defects you
have legal rights against the retailer of this product.
Your legal rights are not limited in any way by our
warranty detailed below.
The warranty for this product is 3 years from the date
of purchase. The warranty period begins on the
date of purchase. Keep the original sales receipt in
a safe location as this document is required as proof
of purchase.
Any damage or defects already present at the time
of purchase must be reported without delay after
unpacking the product.
Should the product show any fault in materials or
manufacture within 3 years from the date of pur-
chase, we will repair or replace it – at our choice
– free of charge to you. The warranty period is not
extended as a result of a claim being granted. This
also applies to replaced and repaired parts.
This warranty becomes void if the product has been
damaged, or used or maintained improperly.
The warranty covers material or manufacturing de-
fects. This warranty does not cover product parts
subject to normal wear and tear, thus considered
consumables (e.g. batteries, rechargeable batteries,
tubes, cartridges), nor damage to fragile parts, e.g.
switches or glass parts.
GB/IE
9