Kongskilde KAI 20 Instructions De Service page 10

GB
1. General safety rules
2. Appliance description
3. Technical data
• READ THE INSTRUCTIONS
GIVEN IN THIS HANDBOOK
BEFORE USING THE APPLI-
ANCE.
• The electrical system to which
the appliance is connected must
comply with current legislation.
It is advisable to install a differ-
ential magneto-thermal switch
ahead of the power outlet.
• Mobile, oil-fired hot air generator
with closed combustion cham-
Type
Heating power (kW)
Air delivery (m /h)
3
Oil consumption (kg/h)
Sound pressure (db(A))
Voltage (V)
Motor power (W)
Current intake (A)
Weight (kg)
Length (mm)
Width (mm)
Height (mm)
Stack diameter (mm)
Tank capacity (l)
10
4. Installation instructions
5. Instructions for use
6. Maintenance
1. General safety rules
• Always unplug the appliance
before performing any mainte-
nance operations.
• Before using the appliance,
check the power cable. It must
not be bent, taut, crushed or
damaged in any way.
• The power cable must be re-
placed by qualified personnel
2. Description of the appliance
ber and connection duct to a
stack for fume exhaust.
3. Technical data
KAI 20
230/50 Hz
Index
25
1100
2,12
72
230/50 Hz
450
1,5
59
1160
580
950
140
38
7. Troubleshooting
only. Use a H07RN type cable
only with plug protected against
splashes of water.
• Do not touch the exhaust gas
outfeed. Danger of burns!
• The appliance must be installed
for industrial use only.
KAI 35
40
2050
3,39
70
540
2,4
75
1250
580
1050
140
80
KAI 65
75
3000
6,35
71
230/50 Hz
670
2,7
105
1560
660
1190
140
80