Publicité
Warnings
ظCare must be taken when handling the various parts of your shelter, as some of them have sharp edges.
ظWe advise you to wear gloves when handling these parts and safety glasses when drilling holes.
ظComfortable footwear is highly recommended.
ظDo not attempt to assemble your shelter until you have checked that you have all the parts indicated in the parts lists. Any shelter left
partially assembled can be seriously damaged, even in light winds.
ظDo not attempt to assemble your shelter in windy conditions. Large panels can catch the wind like a" sail", making construction difficult
and dangerous.
ظKeep children and pets away from the worksite during construction and until the shelter is fully assembled. This will prevent distractions
and any accidents which may occur.
ظNever concentrate your weight on the roof of the shelter.
ظBefore assembling any parts, your base should be constructed and an anchoring system should be ready to use.
ظThe best location is a flat area with good drainage.
ظLeave enough space outside the shelter for ladder access to the roof.
ظWork as a team: Two or more people are required to assemble your shelter
Before beginning assembly
Keep the hardware bags and their contents separate.
If any parts are missing, call our Customer Service
Department.
Read the part list.
Identify and inventory all parts and hardware using the
parts and hardware lists and identifiers in this document.
Tools required
Power drill
Hammer
Leveling board
Screw bits
Gloves
Rake
33
Two adults required to complete assembly
(+ one adult suggested as an instruction reader)
Only adults should set up the product. Do not allow
children in the set-up area until assembly is complete.
Adjustable spanner
Screwdriver
Safety glasses
(one for each person)
ENGLISH
Weeding machine
Ladder
Publicité
