Télécharger Imprimer la page

Taurus NIXUS ONE Mode D'emploi page 8

Publicité

EN
English (Original instructions)
HAIR CLIPPER
NIXUS ONE
DESCRIPTION
A
Blades
B
Inner pivoting blades
C
Main body
D
ON/OFF button
E
Pilot Light
F
Guide comb
G
Guide comb height selector
H
Blade release button
I
Cleaning brush
J
Lubricating oil tank
K
Hair comb
L
Battery Charger
M
Charger socket
If the model of your appliance does not
have the accessories described above,
they can also be bought separately from
the Technical Assistance Service.
USE AND CARE
• Do not use the appliance if its
accessories are not properly fitted.
• Do not use the appliance if the
accessories attached to it are
defective. Replace them immediately.
• Do not use the appliance on wet hair.
• Do not use the appliance if ON/OFF
button doesn't work.
• If you use the appliance in a bathroom
or similar place, unplug the appliance
from the mains when it is not in use,
even if it is only for a short while, as
proximity to water involves a risk, even
if the appliance is disconnected.
• Disconnect the battery charger from
the mains when not in use, before
undertaking any cleaning task, make
any adjustment or accessory change.
• Store this appliance out of reach of
children and/or persons with physical,
sensory or reduced mental or lack of
experience and knowledge.
• Never rest the appliance into a surface
while in use.
• Keep the appliance in good condition.
Check that the moving parts are not
misaligned or jammed and make sure
there are no broken parts or anomalies
that may prevent the appliance from
operating correctly.
• Take special care when fitting and
removing accessories as the blades
are sharp. Be careful and avoid direct
contact with the cutting edges of the
blades.
• Never leave the appliance connected
and unattended if is not in use. This
saves energy and prolongs the life of
the appliance.
• Keep children and bystanders away
when using this appliance.

Publicité

loading