Télécharger Imprimer la page

Outsider LOOP CORNER 171 Instructions De Montage page 4

Publicité

#171 LOOP CORNER - MOUNTING
B2 - GROUND FIXATION
NEDGRAVNING/BODENBEFESTIGUNG/
FIJACIÓN AL SUELO /FIXATION AU SOL
B2
M10x12
out-sider a/s
info@out-sider.dk
Kigkurren 8A, Islands Brygge
www.out-sider.dk
DK-2300 Copenhagen S
B2
127mm
130mm
450mm
Ø12mm
Ø12mm
80mm
230mm
260mm
GB
Each bracket is mounted to the bottom of Loop Corner with supplied
M10 x12 bolts.
Estimate the required number of brackets (1-2) according to local
conditions.
DK
Hvert beslag monteres i bunden af Loop Corner med medleverede
M10x12 bolte.
Antal af beslag vurderes efter forholdene (1-2stk).
DE
Jede Halterung wird mit der mitgelieferten Halterung an der Unterseite
des Loop Corner montiert M10 x12 Schrauben.
Schätzen Sie die erforderliche Anzahl der Halterungen (1-2)
entsprechend den örtlichen Gegebenheiten ab.
ES
Cada soporte está montado en la parte inferior de Loop Corner con
pernos M10 x12 suministrados.
Calcule el número requerido de soportes (1-2) según las condiciones
locales.
FR
Chaque support est monté au bas du Loop Corner avec le support
fourni Boulons M10 x12.
Estimez le nombre de supports requis (1-2) en fonction des conditions
locales.
01.08.2024
04

Publicité

loading

Produits Connexes pour Outsider LOOP CORNER 171