Publicité
CTP 2500
TECHNICAL SPECIFICATION
Rated Voltage: 230V~ 50Hz
Charging Time: 4 hours
HOW TO USE
1. This hair clipper can be used with or without cord. If you want to use it with cord and the battery is fully
discharged, it cannot work, wait 1 minute to charge it a little. On the other side, it is normal that body is
a bit hot while you are using it with cord or when it is fully charged.
2. Connect the adaptor to charging connection on bottom side of the appliance, after plug the adaptor to
the mains. Indicator light will light in red and the battery will charge. You also can charge the battery out
of hair clipper connecting the adaptor to it, for removing the battery unscrew the base and remove the
battery. For full charging it needs 4 hours, after that it can be used for more than 300 minutes. It is
recommended for first charge of battery or after 6 months with no use, 10 hours of charging to active
the rechargeable battery activity. Avoid long time recharge (for more than 6 hours) or lifespan of battery
will reduce considerably
3. Turn on the appliance with ON/OFF push-button, push it to switch on. Push it again to switch off.
USING OF ACCESSORIES
When you mount or dismount the combs, the appliance should be switch off.
1. Choose the guide comb according desired length (3, 6, 9, 12mm).
2. Place the comb facing its rail guide and rail guide of hair clipper and push it until hear a click. See below
pic.
3. Each guide comb has a length (3, 6, 9, 12mm). Once it is placed you can change the length turning the
precision cutting selector (0.8 to 2.0mm).
4. To remove guide comb, push upward on the back side and the comb will be out easily.
11
Publicité
