Deodorization
The function will operate automatically.
Deodorizing fan automatically turns on after
seating and turns off 3 minutes after leaving
the seat.
Auto Flush
Human body leaves the seat sensor
area after seating.
When the human body leaves the seat after
seating, it will automatically flush once.
Kick to Flush
Kick the "foot touch button".
To flush the toilet.
Do not kick with force or high frequency.
Sensing Cover Flip
Press the "Nozzle clean + H/C Massage" buttons
briefly to turn on/off the sensing cover flip function.
When the human body approaches, the seat cover
can be automatically opened by using microwave
induction components.
UV
After running the cleaning function, ultraviolet rays
sterilize the spray rod surface and start 10 seconds
after leaving.
After pressing the "stop" button of remote control or
the seat, the stop command is sent to immediately
stop the sterilization function of the ultraviolet
spray rod.
28
UV
Battery Backup Installation
●Take out the battery box, pry open the two sides of the clasp with a
screwdriver, take out the battery box cover;
●Align the positive and negative terminals of the battery with the positive
and negative terminals inside the battery box, and then install it into the
battery box base.Cover the battery
compartment cover tightly and lock the clips.
●Connect the connection cable of the battery box to the connection cable at
the rear of the product and lock the nut.
Please do not insert the battery and the connecting cable forcibly, otherwise
it will cause damage to the product.
If you have any questions, please call customer service.
Attention:
Please confirm the positive and negative battery
Do not charge, disassemble, burn, mix with old batteries or different types
of batteries, so as not to cause leakage or explosion. The battery box has a
moisture-proof function, please ensure that the fixing screws are screwed in
place so as to achieve a good sealing effect Need to replace the battery
recommended to contact professionals to replace.
Power/Stop
● Slow-closing lid/seat
Preserve your toilet's life and allows you to close the lid/seat silently.
●Damper
The product has installed the damper which provide the toilet cover and
toilet seat with a buffer function, to achieve the mute effect.
●8 Layers of safety
8 different built-in safety features to protect the user and product.
●Memory mode
After power failure, water temp, water pressure, seat temp, and wand
position are all restored to mid-range after power failure. Night light is
turned on by default after power failure.
On / off, keep the last memorized setting state.
● Pre-flushing
After seating, the product will flush once towards the seat to ensure that the
seat wall is moistened.
29