Publicité
Box content
-
CeramicCare Unique Triangle
-
Instruction manual
3. OPERATION
1. Before plugging the appliance into the wall socket, make sure
that the mains voltage matches the voltage specified on the
rating label of the product and that the socket is earthed. Plug
the appliance to a power supply.
2. Set the mode knob to the desired position (1, 2 or 3).
3. Run the brush through damp or dry hair, from roots to ends,
until the desired style is achieved.
WARNING: do not obstruct the air inlet of the appliance during use.
4. When you have finished, turn the mode knob to the off position
(0) and disconnect the appliance from the mains.
5. Place the hot air brush on a heatproof surface until it cools
down. Remove hair and dust and clean the appliance with a
soft cloth.
6. Store the brush in a dry place.
ENGLISH
CERAMICCARE UNIQUE TRIANGLE
59
Publicité
