Télécharger Imprimer la page

Kokido Vektro PRO Manuel D'utilisation page 12

Publicité

How to remove the battery pack for battery disposal only
by authorized technician)
Recommended tools (not included): Philips screwdriver.
1) Follow instructions to release the
canister and filter cone.
2) Use small flat screwdriver to pry and
remove the screw covers as shown.
3) Use the screwdriver to unscrew the
6 screws located on the top plate
and then detach it from the rear
body to expose the rear body's
cover.
4) Unfasten 6 screws and detach the
cover to expose the PCBA, motor
assembly, and battery pack.
5) To detach the battery connection
wire, press the clip on the
connector and then pull it out.
6) Unfasten the 3 screws to remove
the battery compartment cover
and then remove the battery pack.
NOTE: Wrap the connector
immediately with insulating tape
in order to avoid short circuit caused
by contact of both wire terminals.
11
(To be done

Publicité

loading

Produits Connexes pour Kokido Vektro PRO

Ce manuel est également adapté pour:

Ev56Ev57