Siemens VS08G Série Mode D'emploi page 34

Changing the filter
*
*
*
If you have used the vacuum cleaner for fine dust particles (such as plaster or
cement), clean the motor protection filter by tapping it and, if necessary,
replace the motor protection filter and the micro-hygiene filter.
34
Remove the foam and micro-hygiene filter.
* Depending on equipment level
Dispose of the micro-hygiene filter and fit a new
micro-hygiene filter.
Clean the foam and replace in the filter frame.
* Depending on equipment level
Clean the foam and replace in the filter frame.
* Depending on equipment level
en