Publicité
The pump can also be operated while suspended on a rope.
GB
Note:
For operation with rope:
i
Do not operate the pump without pressure hose.
Avoid the pump twisting around its longitudinal axis.
Operation
After the appliance has been connected to the mains power supply, the pump can working.
Risk of damage to the appliance!
The float switch must be able to move so that the submersible pump cannot run dry.
ATTENTION!
Cleaning and maintenance
Cleaning and maintenance overview
Before every use
Check casing and cables for damage.
Check float switch for damage.
After every use
Clean the appliance.
Cleaning the appliance externally
Rinse with clean water. Remove stubborn contamination with a brush and detergent. Submerge the pump
in a container with clean water and switch on for a short time to rinse the inside of the pump.
Cleaning the suction area
- Clean all accessible insides of the casing. Remove fibres which have wound around the rotor shaft by
opening the pressure connection. Remove stubborn contamination with a brush and detergent.
Note:
i
Before using the pump again, first "soak" it so that any possible dirt residues do not
block the appliance.
16
Visual inspection.
Lift and shake the switch to check the free
movement of the contained metal balls.
Publicité
