Publicité
NOTE:
To disconnect the hub from the
charging bank, first rotate the collar of the
hub connector according to rotation arrow
marked on the connector and pull it out
from the charging bank as shown in Fig. 2b.
2. Connect the charging bank to the
next charging bank in the same way.
You can continue to connect more
charging banks (no more than 30
charging banks) if necessary (step b).
3. Plug the hub into the power supply (step c). The hub status indicator and charging
bank AC status indicator will glow green, indicating that the hub and the charging
bank are working properly and can charge the battery packs.
4. Align the raised ribs of a battery pack with the mounting slots in one of the
charging bank's battery bays. Slide the battery pack down into the battery bay
(step d). The battery release button will spring up indicating that the battery pack
is securely attached.
NOTE:
For the high-capacity battery
pack, make sure the arrow on the battery
pack aligns with the electronic contact in
the high-capacity battery bay. Slide the
battery pack down into the battery bay
(Fig. 3a). The two battery release levers
will spring up and outward, at the same
time the red marks can be seen on the
battery release levers, indicating that the
battery pack is securely attached (Fig. 3b).
PGX
COMMERCIAL CHARGING BANK — PGX1400PB/PGX1400PB-FC
™
2b
a
3a
Electronic contact
3b
Red Mark
b
Arrow
Battery-release
Lever
13
Publicité
