Publicité
EN
English (Original instructions)
COFFEE GRINDER
TASTE MILL
DESCRIPTION
A
Lid
B
Blade
C
Main Body
D
Start button
E
Coffee hopper
USE AND CARE
• Fully extend the appliance's supply cord before each use.
• Do not use the appliance if its accessories are not
properly fitted.
• Do not use the appliance if the accessories attached to it
are defective. Replace them immediately.
• Do not use the appliance if it is empty.
• Do not use the appliance if the start button does not work.
• Do not move the appliance while in use.
• Do not use the appliance if it is tipped up and do not turn
it over.
• Do not turn the appliance over while it is in use or
connected to the mains.
• Do not force the appliance's work capacity.
• Store this appliance out of reach of children and/or
persons with physical, sensory or reduced mental or lack
of experience and knowledge.
• Keep the appliance in good condition. Check that the
moving parts are not misaligned or jammed and make
sure there are no broken parts or anomalies that may
prevent the appliance from operating correctly.
• Use the appliance and its accessories and tools in
accordance with these instructions, taking into account
the working conditions and the work to be performed. Use
the appliance for operations different from those intended
could result in a hazardous situation.
• Do not use the appliance for more than 30 seconds at
a time. In case of operate in cycles; allow the appliance
a resting period of at least 1 minute between each
cycle. Under no circumstances should the appliance be
operated for more time than necessary.
• Do not use the appliance with frozen goods or those
containing bones.
INSTRUCTIONS FOR USE
BEFORE USE
• Make sure that all product's packaging has been
removed.
• Please read carefully the "Safety advice and warnings"
booklet before first use
• Before using the product for the first time, clean the parts
that will come into contact with coffee in the manner
described in the cleaning section.
CAUTION
• Always operate the grinder with the safety lid securely in
place.
• Keep hands and utensil out of the coffee hopper while
grinding and when the appliance is plugged in.
• Make sure there are no foreign bodies between the beans
before grinding.
• The lid must be correctly positioned in the grinder before
using it.
USE
• Extend the supply cord completely before plugging it in.
• Remove the lid.
• Pour coffee beans into the coffee hopper.
• Do not overfill the receptacle.
• Fit the lid in their correct position. Check that the
assembly is correctly positioned in the body.
• Connect the appliance to the mains.
• Press start button to start the appliance.
• The appliance will start grinding.
• Check the consistency of coffee ground from the lid.
• To obtain more ground coffee, you can repeat an
operation by pressing the start button again.
• If you wish to remove the lid to check the consistency of
the ground coffee, never remove the lid until the blades
have come to a complete stop.
• When the desired grind has been achieved, release the
start button.
• To avoid a sudden start, the appliance is switched on
gradually.
ONCE YOU HAVE FINISHED USING THE APPLIANCE
• Stop the appliance by releasing the pressure on the start
button.
• Unplug the appliance from the mains.
• Remove the lid.
• Pour out the coffee ground directly.
• Clean the appliance.
Publicité
