Télécharger Imprimer la page

EDM Product 08393 Manuel D'instructions page 17

Publicité

▶Maintain battery products. Check for misalignment or binding of
moving parts, breakage of parts and any other condition that may
affect the product's operation. If damaged, have the product repaired
before use. Many accidents are caused by poorly maintained battery
products.
▶Use the battery product, accessories and tool bits etc. in accordance
with these instructions, taking into account the working conditions
and the work to be performed. Use of the product for operations
different from those intended could result in a hazardous situation.
▶Recharge only with the charger specified by the manufacturer. A
charger that is suitable for one type of battery pack may create a
risk of fire when used with another battery pack.
▶Use battery products only with specifically designated battery packs.
Use of any other battery packs may create a risk of injury and fire.
▶When battery pack is not in use, keep it away from other metal
objects, like paper clips, coins, keys, nails, screws or other small
metal objects, that can make a connection from one terminal to
another. Shorting the battery terminals together may cause burns
or a fire.
▶Under abusive conditions, liquid may be ejected from the battery;
avoid contact. If contact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical help. Liquid ejected
from the battery may cause irritation or burns.
▶Battery products do not have to be plugged into an electrical
outlet; therefore, they are always in operating condition. Be aware
of possible hazards when not using your battery product or when
changing accessories. Following this rule will reduce the risk of
electric shock, fire, or serious personal injury.
▶Do not place battery products or their batteries near fire or heat. This
will reduce the risk of explosion and possibly injury.
▶Do not crush, drop or damage battery pack. Do not use a battery
pack or charger that has been dropped or received a sharp blow.
A damaged battery is subject to explosion. Properly dispose of a
dropped or damaged battery immediately.
▶Batteries can explode in the presence of a source of ignition, such
as a pilot light. To reduce the risk of serious personal injury, never
use any cordless product in the presence of open flame. An exploded
battery can propel debris and chemicals. If exposed, flush with water
immediately.
▶Do not charge battery product in a damp or wet location. Following
this rule will reduce the risk of electric shock.
▶For best results, your battery product should be charged in a location
where the temperature is more than 5°C but less than 40°C. To
reduce the risk of serious personal injury, do not store outside or in
vehicles.
▶Under extreme usage or temperature conditions, battery leakage may
occur. If liquid comes in contact with your skin, wash immediately
with soap and water. If liquid gets into your eyes, flush them with
clean water for at least 10 minutes, then seek immediate medical
attention. Following this rule will reduce the risk of serious personal
Instruction manual
▶Have your battery product serviced by a qualified repair person using
▶When servicing a battery product, use only identical replacement
▶Save these instructions. Refer to them frequently and use them to
COMPONENT LIST
1. Trigger switch
2. Heating on/off button
3. Nozzle
4. Glue stick
5. LED indicator light
OPERATING INSTRUCTIONS
17
injury.
only identical replacement parts. This will ensure that the safety of
the battery product is maintained.
parts. Follow instructions in the Maintenance section of this
manual. Use of unauthorized parts or failure to follow Maintenance
instructions may create a risk of shock or injury.
instruct others who may use this tool. If you loan someone this tool,
loan them these instructions also.
3
1
Rated voltage of battery
Heating time
Glue stick diameter
Warning! Do not allow familiarity with this product to make
you careless. Remember that a careless fraction of a
second is sufficient to inflict serious injury.
Warning! Always remove battery pack from the tool when
you are assembling parts, making adjustments, cleaning,
or when not in use. Removing battery pack will prevent
ref. 08393
4
2
5
20V DC
approx. 4 Min
11mm
ES
PT
EN
FR

Publicité

loading