Publicité
SECURITY INSTRUCTIONS
SYMBOLS: The following symbols are used in this
manual and on the machine:
ADVERTENCIAS GENERALES DE SEGURIDAD
PARA HERRAMIENTAS ELÉCTRICAS
Read all warnings and safety instructions. Ignoring warnings and
following instructions may result in electric shock, fire, and/or serious
injury. Save the warnings and safety instructions for future reference.
The term "power tool" in the warnings refers to either the mains-
operated (corded) power tool or the battery-operated (cordless) power
tool.
BEFORE USING
▶Remove any packing materials and loose parts from the unit.
▶Check the accessories before use. They must fit the machine and
its purpose.
▶If the machine is new, the battery must be charged first.
▶Attention! After long storage, the battery capacity will decreaseá.
▶A new battery or one that has not been used for a long time
reaches full performance only after charge and discharge cycles. A
substantial drop in the run time per charge indicates that the battery
is worn out and should be replaced.
WORK AREA
▶Keep the area clean and well lit. Clutter or poor lighting can cause
accidents.
▶Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create
sparks which may ignite the dust or fumes.
▶Keep children and bystanders away while operating a power tool.
Distractions can cause you to lose control.
ELECTRICAL SAFETY
▶Always check that the power supply corresponds to the voltage
indicated on the nameplate.
▶Power tool plugs must match the outlet. Never modify the plug
in any way. Do not use adapter plugs with grounded power tools.
Unmodified plugs and matching outlets will reduce the risk of
electric shock.
▶Avoid bodily contact with grounded surfaces such as pipes, heaters,
Instruction manual
▶Do not expose power tools to rain or wet conditions. If water gets
▶Do not damage the cable. Never use the cord to carry, pull, or
▶When operating a power tool outdoors, use an extension cord
▶If using a power tool in a wet location is unavoidable, use a power
PERSONAL SECURITY
▶Stay alert, watch what you are doing and use common sense when
▶Wear safety gear. Always wear eye protection. Wearing safety
▶Avoid accidental starts. Make sure the switch is in the off position
▶Carrying power tools with your finger on the switch or plugging in
▶Remove all adjusting wrenches or wrenches before turning on the
▶Don't try to spread your hands too far. Keep your feet firmly on the
▶Dress appropriately. Do not wear loose clothing or jewelry. Keep your
▶If there are devices for connecting dust extraction and collection
USE AND CARE OF ELECTRICAL TOOLS
▶Don't expect the power tool to do more than it can. Use the right
15
toves and refrigerators. There is a great risk of electric shock if your
body is grounded.
into a power tool, it will increase the risk of electric shock.
unplug the power tool. Keep cord away from heat, oil, sharp edges,
or moving parts. Damaged or entangled cords increase the risk of
electric shock.
suitable for outdoor use. Using a cord suitable for outdoor use
reduces the risk of electric shock.
supply protected by a residual current device (RCD). The use of an
RCD reduces the risk of electric shock.
operating a power tool. Do not use a power tool when you are tired
or under the influence of drugs, alcohol or medication. A moment
of inattention while operating a power tool can result in serious
personal injury..
equipment such as a dust mask, non-slip safety shoes, a hard hat,
or hearing protection whenever necessary will reduce the risk of
personal injury.
before connecting to power source and/or battery, lifting or carrying
the tool.
power tools when the switch is in the on position increases the
chance of accidents.
power tool. An adjustable wrench or wrench placed in a rotating part
of the power tool can cause personal injury..
ground at all times. This will allow you to maintain control of the
power tool in unexpected situations.
hair, clothing, and gloves away from the power tool. Loose clothing,
jewelry, or long hair can become entangled in moving parts.
facilities, make sure they are connected and used properly. Using
these devices can reduce dust-related hazards.
power tool for what you want to do. A power tool will perform better
and be safer if it is used in the context for which it was designed.
ref. 08393
ES
PT
EN
FR
Publicité
