Publicité
Viewing and
Understanding LEDs
Two LEDs appear on the front of
the amplifier. One is labeled POWER
and appears as solid red during initial
power up, flashes green during a boot
sequence, and appears solid green
when fully booted.
The STATUS LED uses the following
indicators to provide information
about the appliance:
•
FLASHING RED
No network connection found.
•
SOLID BLUE
in an uninitialized state and is
not associated to a server.
(The server may be in a discovery
mode.)
•
SOLID GREEN
server and is in normal operation.
•
FLASHING GREEN
is not registered with the Nyquist server.
•
SOLID RED
so that the Nyquist application can resume.
•
FLASHING BLUE
NQ‑A4060‑G2, NQ‑A4120‑G2, NQ‑A4300‑G2
–
– The amplifier is
– The amplifier is registered to a Nyquist
– The amplifier has an IP address but
– The amplifier needs to be rebooted or reset
– The amplifier is updating.
Publicité
