Publicité
LERBAKKEN 10, 8410 RØNDE DENMARK
Ex input
CH1 (terminal 41,42,43,44)
CH2 (terminal 51,52,53,54)
Vt (U
):
o
It (I
):
o
P
:
o
Lo/Ro
IIC /
Group A,B
C
/ C
5 F
a
o.
L
/ L
100 mH
a
o.
U
:
i
I
:
i
C
:
i
L
i.
Status Relay. terminal (33,34)
Voltage max:
Power max:
Current max:
Zone 2 installation:
Voltage max:
Power max:
Current max:
Installation notes:
In Class I, Division 2 installations, the subject equipment shall be mounted within a tool-secured
enclosure which is capable of accepting one or more of the Class I, Division 2 wiring methods
specified in the National Electrical Code (ANSI/NFPA 70) or the Canadian Electrical Code (C22.1).
In Class I, Zone 2 installations, the subject equipment shall be mounted within a tool-secured enclosure
which is capable of accepting one or more of the Class I, Zone 2 wiring methods specified in the
National Electrical Code (ANSI/NFPA 70) or the Canadian Electrical Code (C22.1). Where installed in
outdoor or potentially wet locations, the enclosure shall, at a minimum, meet the requirements of IP54.
In Class I, Zone 2 installations, the installer shall ensure protection of supply terminals against transient
voltages exceeding 140% of the rated supply voltage.
Install in environments rated Pollution Degree 2 or better; overvoltage category I or II.
The module must be supplied from a Power Supply having double or reinforced insulation.
The use of stranded wires is not permitted for mains wiring except when wires are fitted with cable
ends.
For installation on the 9400 Power Rail the power must be supplied from Power Control Module Unit
9410.
The module is galvanic isolated and does not require grounding.
Use 60 / 75 ºC Copper Conductors with wire Size AWG: (26-14).
Warning: Substitution of components may impair intrinsic safety.
Revision date:
2019-04-04
34
8.7 V
18.4 mA
40 mW
892 μH/
IIB /
IIA /
Group C,E,F
Group D,G
50 F
1000 F
300 mH
700 mH
10 V
30 mA
30 nF
820 nH
Version Revision:
V5 R0
9113-EMP - Version de produit 9113-004
125 VAC / 110 VDC
62,5 VA / 32 W
0.5 A AC / 0.3 ADC
32 VAC / 32 VDC
16 VA / 32 W
0.5 A AC / 1 ADC
Prepared by:
PB
9113QF01
Page:
2/3
Publicité
