Contrast Adjustment - Sony TSL-S11000 Mode D'emploi

Unload Selection

Contrast Adjustment

18
Chapter 3 Operation
When Unload is selected in in the Menu screen, the following screen appears.
From this screen you can select what happens when the last cartridge finishes
processing: that is, whether it is simply unloaded from the DDS drive, or if
the first cartridge is subsequently reloaded and processing continued
automatically (in a continuous loop).
1
Press the SELECT button, if necessary, to move the cursor (z) to the
desired setting.
When OFF is selected, the first cartridge does not automatically reload
into the DDS drive after the last cartridge finishes. When ON is selected,
the first cartridge automatically reloads.
You can press the EJECT button to cancel any change to the selection
and return to the Menu screen.
2
Press the ENTER button to accept the selection and return to the Menu
screen.
When Contrast is selected in the Menu screen, the following screen appears.
You can adjust the display contrast from this screen.
1
Press the SELECT button, as necessary, to adjust the contrast.
You can press the EJECT button to cancel any change to the selection
and return to the Menu screen.
2
Press the ENTER button.
The contrast setting is accepted and the display returns to the Menu
screen.
Unload
Contiunuous
z OFF
ON
Unload Selection Screen
Contrast
Adjustment
ppppπππ
Contrast Adjustment Screen