Publicité
RECOMMENDATIONS FOR USE
• In order to avoid any water sprays to come out from the fan, the cooler, under normal
working conditions, should be placed on a flat surface, and its cellulose panels
perpendicular to the floor.
•
When it is first switched on, it is recommended to fill the tank as per instructions and
run one-hour cycle at least with the COOL function ON and the fan operating speed set
to the minimum.
If the appliance is operated at the maximum air flow from the very start, it may cause the
passage of water from the cellulose panel to the fan, causing water sprays from the front
of the cooler and possible damages to the bearing of the fans themselves.
•
The first time it is switched on, you might feel an unpleasant smell of the cooled air,
caused by the new cellulose panel. We suggest you should complete at least one
cooling cycle outdoors in an open space (fill a water tank, start the COOL function and
let the appliance work until it finishes water completely), before positioning and using it
at the final place.
•
You can also add ice to water, to maximise the appliance performance in the hottest
weather, as well as scented essences (to distribute cooled and scented air in the zone
of use). Be however sure to use water-based essences so as to avoid clogging the filter
by oils or soaps, which may affect the effectiveness and proper functioning of the cooler.
• It is suggested to run a lime washing cycle at least once in a year, by adding one litre
of white vinegar in the water tank and activating the COOL function until the tank is
completely exhausted. Once the cycle with vinegar is ended, fill again the tank by water
only and repeat the procedure.
27
Publicité
