Publicité
OPERATION INSTRUCTION
ON/OFF
This turns the cooler on or off.
COOL
This activates the cooling function. Note that there is a delay of one minute before the fan starts while the
cooling pads wet up.
BLAST
When COOL is pressed again, the water evaporation feature is turned off, with only the fan operating.
SPEED
Pressing SPEED will select low, medium or high fan speed.
SWING
This activates/deactivates swing function.
TIMER
Delayed start
The timer setting can be used to start the cooler after a certain number of hours delay. When only the green
POWER light is on, press TIMER until the number of hours delay (1-24) is shown.
TIMER
Automatic stop
When the cooler is already going, press timer to set the number of hours (1-24) until the machine will
automatically switch off.
WATER SUPPLY
Use only clean, fresh water.
Pour water into the water inlet on the right hand side of the unit. Alternatively, attach a hose to the water inlet
on the left side for automatic filling. Note a pressure reducing valve is recommended for high pressure water
supplies.
24
Publicité
