Publicité
13. Tighten screws with hex key.
Repeat with left foot carriage.
16. To lower the rail, press down
the foot pedal at the joint and
lower the rail gently to the
ground.
14. Connect the power cord and
toggle to power switch on.
17. To lock into place, pull up on
this handle until you hear a
click. Once you hear the click,
the rower is safe to use.
15. Route the power cable
through the cable routing
clips legs, as shown above.
18. Attach screen with the
pre-installed screws using the
included screwdriver.
15
1
Publicité
