Publicité
MAINTENANCE AND CLEANING.
1. Before cleaning the vacuum sealer, please turn off the
vacuum sealer and unplug the power cord.
2. Do not immerse the vacuum sealer in water or other
liquid.
3. Wipe the surface and vacuum channel with a piece of
damp cloth or sponge after the vacuum sealer is cooling
down.
4. Do not use a brush to clean the vacuum sealer, it may
scratch the surface.
5. During the vacuum sealing process, small amounts of
liquids, crumbs or food particles can be inadvertently pulled
into the vacuum channel. Empty the vacuum channel after
each use with a piece of cloth or paper.
6. After each use, place the paper stand between the
upper lid and lower lid to prevent sealing foam
compression.
Troubleshooting
To quickly solve your problems and to prevent improper using and settings, please follow operations
below. If your problems or enquiry cannot be eliminated after reading the table, please do not
hesitate
Problems
Vacuum sealer does not work
Vacuum pump is running, but bag
cannot be completely vacuumed or
cannot be sealed.
to
Solution
1. Make sure vacuum sealer is plugged in, make sure
wall outlet is functional.
2. Make sure the power cord and the vacuum sealer are
not defective. For your safety, do not operate defective
vacuum sealer.
1. Adjust the bag and try again. Make sure the open
end of the bag is down inside the vacuum channel.
2. Check the sealing foam are loose or tearing. You may
take out the sealing foam and change it, clean it and re-
insert it.
3. Check for food debris around seal area and heat strip.
contact
us.
Publicité
