Publicité
3. Connect the speaker wires to the
speaker terminals.
• Connect the speaker wires, passing them
through the terminal cover.
• Fix the speaker wires securely with the termi-
nal screws.
Terminal screw
Speaker
terminal
Speaker wire
4. Push on the terminal cover.
Connecting the Speaker wires
Two-channel mode (stereo)
Terminal cover
One-channel mode (mono)
The speaker output mode can be two-
channel (stereo) or one-channel (mono).
Connect the speaker leads to suit the mode
according to the figures shown below.
• When either the RCA input or the speaker
input is connected, RCA output becomes
functional. Do not connect both the RCA
input and the speaker input at the same time.
≠
+
+
≠
+
≠
≠
+
(Right)
Speaker input
(Left)
(Left)
Speaker
(Right)
(Right)
Speaker input
(Left)
Speaker
(Mono)
8
Publicité
