JVC EXAD KD-AVX20 Manuel D'instructions page 62

Symptoms
• "Now Reading..." keeps flashing on the
monitor.
• Correct characters are not displayed (e.g.
album name).
• While playing a track, sound is sometimes
interrupted.
• The iPod/iPhone does not turn on or does not
work.
• The sound is distorted.
• "Disconnect" appears on the monitor.
• Playback stops.
• "No Files" appears on the monitor.
• "Reset 01" – "Reset 07" appears on the
monitor.
• "Reset 08" appears on the monitor.
• The iPod's/iPhone's controls do not work
after disconnecting from this unit.
• "Restricted Device" appears on the monitor.
• No operations are available while playing
back a track containing artwork.
Remedies/Causes
• Readout time varies depending on the USB device.
• Do not use too many hierarchy, folders and empty
folders.*
* Folder that is physically empty or folder that contains
data but does not contain valid MP3/WMA/WAV track.
• Turn off the power then on again.
• Do not pull out or connect the USB device repeatedly
while "Now Reading..." is displayed on the monitor.
For available characters, ☞ page 57.
The tracks have not been properly copied into the USB
device. Copy tracks again into the USB device, and try
again.
• Check the connecting cable and its connection.
• Charge the battery of the iPod/iPhone.
• Reset the iPod/iPhone.
Deactivate the equalizer either on this unit or the iPod/
iPhone.
Check the connecting cable and its connection.
The headphones are disconnected during playback. Restart
playback.
No tracks are stored. Import tracks to the iPod/iPhone.
Disconnect the adapter from both this unit and iPod. Then,
connect them again.
Check the connection between the adapter and this unit.
Reset the iPod/iPhone.
Check whether the connected iPod/iPhone is compatible
with this unit. (☞ page 55)
Operate the unit after the artwork is loaded. (☞ page 56)
62