Télécharger Imprimer la page

Cosatto i-Size 360 Rotating Base Mode D'emploi page 8

Publicité

Adjusting the child car seat's orientation:
9-
Pull and hold the child car seat rotate puller (a) then rotate the car seat (b).
10- Seat positions:
a: Rearward facing position:
When use as a rearward facing child car seat, the car seat is suitable from birth, height
between 40 and 87 cm, up to maximum weight of 13 kg.
b, c: Sideward facing position:
The sideward facing position allow access for placing or removing a child from the
seat unit after the car seat is fitted.
WARNING: Do Not travel with the child car seat in this position.
11- Removing:
Rotate the child car seat to the sideward facing position (a & b).
Press and hold the
(d).
Child car seat base:
Removing:
12- Fully retract the support-leg (a & b).
13- Disengage the ISOFIX arms (a).
Remove the base from the vehicle seat (b).
Checklist:
Have you check the compatibility of the child restraint
system with the intended vehicle?
If applicable, is the air-bag de-activated?
Is your child restraint system correctly fitted to the vehicle
seat?
Is your child car seat correctly fitted to the child restraint
system?
Have you check the safety indicators on ISOFIX arms, ISOFIX
support-leg and seat security?
Is your child correctly secure in the child car seat?
Is harness adequately tensioned and not twisted?
5
child car seat release lever
(c) and lift the child car seat off the base

Publicité

loading

Produits Connexes pour Cosatto i-Size 360 Rotating Base