Publicité
Visual language Key:
Fitting & Operation Information:
Please refer to the following diagrams:
Location:
1-
WARNING: Ensure that your vehicle has ISOFIX anchor points.
Refer to the compatibility list for information of where the child car seat base will fit in
your vehicle.
ISOFIX guide (optional):
2- Fitting:
Removing is a reversal of this procedure.
Child car seat base:
3- Preparation:
Open the ISOFIX support-leg (a).
Press and hold ISOFIX arm adjustment buttons (b) and extended the arms fully (c).
Fitting:
4-
Position the base over the vehicle seat (a).
Engage the ISOFIX arms (b) and ensure that the ISOFIX arm security indicators are
green (c).
5-
Push the base back until it rests firmly against the vehicle seat backrest (a).
6-
Adjust the support-leg (a) until it makes firm contact with vehicle floor (b) and the
support-leg contact indicator is green (c).
Child car seat:
Fitting:
7-
Place the child car seat on base (a) and push down until securing rods are fully
engaged (b).
The indicator will turn green (c).
Lift the child car seat to check locks are secure (d).
8-
Activate the side impact protection system on the out board side (a).
4
Publicité
