Publicité
ERROR CODE
ERROR CODES
E01、E06
Faulty power supply
E07
E02
Hand controller connection
E04
or communication error
E05
stop in case of obstruction
E08
Desktop tilts protection
HOT
Overheat protection
E11 、E13
E21 、E23
Loose connection between
E31 、E33
the legs and the control box
E41 、E43
E12 、E22
Overload or motor failure
E32 、E42
E14 、E17
E24 、E27
Desk leg position sensor
E34 、E37
E44 、E47
E15 、E25
E35 、E45
E16 、E26
E36 、E46
E18 、E28
The load is too large,
E38 、E48
CAUSE
Check the power supply
of thecontrol box
Unbalanced legs
Reinitialize
Check hand control cable
Release the button and run again
Reinitialize
Please wait for the temperature to drop before use.
Check the connection cable (connect the adapter cable)
Replace control box
Press the "+" key or the "-" key again. If the problem persists, please check
abnormality
whether the plug wire of the table leg is inserted in place.
Desk leg failure
If it cannot be eliminated after restarting, replace the desk legs.
Leg Stuck
Reinitialize
Reduce load
overloaded
SOLUTION
21 / 33
GIVE US A CALL: 1-844-416-2090
MON-FRI 8:30AM - 5:30PM (PT)
customerservice@eurekaergonomic.com
Publicité
