LIVARNO home HG08220 Instructions D'utilisation Et Consignes De Sécurité page 13

Power adaptor (Model no.
JT-DC30V7.2W-H5-IP44) GS certified.
SELV: Safety extra low voltage
Ta: Maximum rated ambient
temperature
Tc: Rated maximum operating
temperature of the case
of a controlgear
Included items
1 LED tree (1 tip, 1 middle part, 1 lower part)
1 Stand
1 Power adaptor
3 Fixing screws
2 Ground spikes
1 Operating instructions
Safety information
BEFORE USING THE PRODUCT, PLEASE FAMIL-
IARISE YOURSELF WITH ALL OF THE SAFETY
INFORMATION AND INSTRUCTIONS FOR USE!
WHEN PASSING THIS PRODUCT ON TO OTHERS,
PLEASE ALSO INCLUDE ALL THE DOCUMENTS!
DEATH AND ACCIDENTS FOR
TODDLERS AND CHILDREN!
Never leave children unsupervised with the
packaging material. The packaging material
represents a danger of suffocation. Children
frequently underestimate the dangers. Please
keep children away from the product at all times.
This product is not a toy. It does not belong in
the hands of children. Children are not able to
appreciate the dangers associated with using
the product.
This product can be used by children aged
from 8 years and above and persons with re-
duced physical, sensory or mental capabilities
or lack of experience and knowledge if they
have been given supervision or instruction con-
cerning use of the product in a safe way and
understand the hazards involved. Children shall
DANGER OF
not play with the product. Cleaning and user
maintenance shall not be made by children with-
out supervision.
Ensure that the product is installed by suitably
experienced or qualified persons only.
CAUTION! RISK OF OVERHEATING! Do
not operate the product inside the packaging.
Do not pull the lead wire
is laid down properly so that no one walks or
trips over it.
The product can be used on all surfaces officially
classified as being of "normal flammability".
Do not attach any other objects to the product.
SUITABLE FOR INDOOR AND OUTDOOR USE.
Avoid the danger of
death from electric shock!
Before use, ensure that the mains voltage
available is the same as the required operating
voltage for the LED driver (220–240 V∼).
Before connecting the product to the lead wire
you should always check the product and
2
the lead wire for any damage.
2
Never use the product if you discover that it is
damaged in any way.
This lead wire of the LED tree
2
placeable. Hence if it becomes damaged you
must dispose of the entire product.
This product does not contain any parts which
can be serviced by the user. The LEDs cannot
be replaced.
Only use the product with the supplied
power adaptor for the type (Model No.
4
JT-DC30V7.2W-H5-IP44); all warranty claims
will otherwise expire.
Never open any of the electrical parts or insert
any kind of object into them.
Protect the lead wire
2
mechanical loads and hot surfaces.
The light chain isn't allowed to connect to
220‒240 V ~ without LED driver.
Where breakage or damage to leds occurs
the product must not be used/energised but
disposed of safely.
This product must not be used without all
gaskets being properly installed.
and make sure it
2
is nonre-
1
from sharp edges,
GB/IE 13