Publicité
Section
Operating this unit
02
% Use an IP-BUS-RCA Interconnector such
as the CD-RB20/CD-RB10 (sold separetely)
to connect this unit to auxiliary equipment
featuring RCA output.
For more details, refer to the IP-BUS-RCA Inter-
connector owner's manual.
The allocation of this auxiliary equipment is
automatically set to AUX2.
# You can only make this type of connection if
the auxiliary equipment has RCA outputs.
Selecting AUX as the source
% Press SOURCE to select AUX (AUX1 or
AUX2) as the source.
# If the auxiliary setting is not turned on, AUX
cannot be selected. For more details, see Switch-
ing the auxiliary setting on page 22.
Setting the AUX title
The title displayed for each AUX1 or AUX2
source can be changed.
1
After you have selected AUX as the
source, press FUNCTION and hold until
TITLE IN appears in the display.
2
Enter a title in the same way as the
built-in CD player.
For details concerning operation, refer to En-
tering disc titles on page 14.
24
En
All manuals and user guides at all-guides.com
Publicité
