Publicité
OPERATING INSTRUCTIONS
LOCK MODE
Press the LOCK button to activate Lock Mode; the LOCK indicator light will turn on.
Lock Mode deactivates and locks both the manual DISPENSE button and the REBOIL
button. In Lock Mode, the KEEP WARM and REBOIL indicator lights turn off.
To deactivate Lock Mode, simply press the LOCK button again. This reactivates the
manual DISPENSE button and the REBOIL button.
To manually lock the spout so no water can come out, rotate the manual push dial on
top of the lid up to the red lock symbol. To unlock, simply rotate the dial down to the
blue unlock symbol. NOTE: This does not affect any mode or function the hot water
pot may be running in. This action simply locks the spout as an added safety feature.
NOTE: If you open and close the lid while the hot water pot is on (even in Lock Mode),
it will continue to function without any change. It will not automatically shut off and
the function indicator lights will not turn on or off.
SPECIAL FEATURE: OVERHEAT PROTECTION
The overheat protection feature operates when the power cord is plugged in but the
inner pot is empty of water. If the hot water pot has shut off automatically, unplug the
power cord from the electrical outlet and wait for the pot to cool, and then add water.
11
Publicité
