Publicité
PRODUCT SPECIFICATIONS
Dual Power Source .......................................18 Volt Battery
The following tools (not included) are needed for assembly and making adjustments:
Adjustable wrench
UNPACKING
This product requires assembly.
Carefully remove the tool and any accessories from the
box. All items listed in the Includes section must be
included at the time of purchase.
WARNING:
Items in this Assembly section are not assembled to the
product by the manufacturer and require customer instal-
lation. Use of a product that may have been improperly
assembled could result in serious personal injury.
If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create acces-
sories or attachments not recommended for use with this
product. Any such alteration or modification is misuse
and could result in a hazardous condition leading to pos-
sible serious personal injury.
FEATURES
or 120 Volts, AC only, 60Hz
TOOLS NEEDED
ASSEMBLY
8 - English
Output .................................................30,000 – 60,000 BTU
Fuel Source ..................................... Propane (not included)
ATTACHING THE HANDLE
See Figure 1, page 13.
Turn the propane heater OFF.
Align the tab on the bottom of the handle to the slot in
the top of the heater.
NOTE: The screw holes in the handle and the heater
should also align when the handle is oriented properly.
Use the provided screws (4) to attach the handle to the
heater.
Tighten each screw securely.
USING PROPANE (LIQUID PROPANE ALSO
CALLED LIQUID PETROLEUM)
Propane is highly flammable and may ignite unexpectedly
when mixed with air. The propane cylinder used with this
forced air heater must meet the following requirements:
Constructed and marked in accordance with the Speci-
fications for LP Gas Cylinders of the U.S. Department
of Transporation (D.O.T.) or the National Standard of
Canada, CAN/CSA-B339, Cylinders,
Spheres, and Tubes for Transporta-
tion of Dangerous Goods and Com-
mission.
Measurements: 12 in. diameter x 18
in. tall with 20 lb. maximum capacity.
Cylinder valve must have:
— Cylinder connection device (Type 1) compatible with
the connector for the propane heater
— Safety relief valve
OPD HANDWHEEL
Publicité
