Publicité
CONTROL PANEL FEATURES
Following are instructions for starting and using your new dryer. Please refer to specific sections of
this manual for more detailed information.
WARNING: To reduce the risk of fire, electric shock, or injury to persons , read this entire
manual, including the Important Safety Instructions, before operating this dryer.
A
POWER ON/OFF BUTTON
A
Press to turn the dryer ON. Press again to
turn the dryer OFF.
NOTE: Pressing the ON/OFF button during
a cycle will cancel that cycle and any load
settings will be lost.
B
CYCLE SELECTOR kNOB
Turn this knob to select the desired cycle.
Once the desired cycle has been selected, the
standard presets will be shown in the display.
On MANUAL DRY cycles, these settings can
be adjusted using the cycle settings buttons
anytime.
C
START/PAUSE BUTTON
Press this button to START the selected
cycle. If the dryer is running, use this button
to PAUSE the cycle without losing the
current settings.
NOTE: If you do not press the START/PAUSE
button to resume a cycle within 4 minutes,
the dryer turns off automatically.
All manuals and user guides at all-guides.com
C
B
D
F
E
MORE TIME/LESS TIME BUTTONS
D
Use these buttons with MANUAL DRY and
TIME DRY cycles to adjust the drying time.
Press the MORE TIME button to increase
the selected manual cycle time by a minute;
press LESS TIME to decrease the cycle time
by a minute.
CYCLE SETTING BUTTONS
E
Use these buttons to select the desired cycle
settings for the selected cycle. The current
settings are shown in the display. Press the
button for that option to view and select
other settings.
TIME AND STATUS DISPLAY
F
The display shows the settings, estimated
time remaining, options, and status
messages for your dryer.
OPTION BUTTONS
G
The OPTION buttons allow you to select
additional cycle options. Certain buttons
feature a special function (see the following
pages for details) that can be activated by
pressing and holding that option button.
G
27
Publicité
