Publicité
AXIS P1468-XLE Explosion-Protected Bullet Camera
(防 防 防 爆 爆 爆 型 型 型 弾 弾 弾 丸 丸 丸 カ カ カ メ メ メ ラ ラ ラ )
Version history
Version
1.0
2.0
3.0
4.0
Specific conditions of use
WARNING
Always refer to the product certificates for any specific conditions of use.
•
Take precautions to minimise the risk of electrostatic charging. For more information,
see Maintenance on page 10.
•
The equipment shall only be used in an area of at least pollution degree 2, as defined in
IEC 60664-1.
•
Equipment must not be exposed to impact energy exceeding 2 Joules to the window, and
4 Joules to the rest of the body.
•
Orientation of the product must be in accordance with the installation instructions. The
device must not be surrounded with more dust than the surfaces can retain.
•
Transient protection shall be provided that is set at a level not exceeding 140% of the
peak rated voltage value at the supply terminals to the equipment
•
Capacitance of accessible metal parts of the equipment is 85.4 pF and shall be considered
in the specific application.
Installation
WARNING
All installation and maintenance must be carried out by a suitably skilled electrician
in accordance with all local and national standards and codes of practice e.g. NFPA70
(National Electrical Code), CSA C22.1 (Canadian Electrical Code, Part I Safety Standard for
Electrical Installations), IEC/EN 60079-14 (Explosive atmospheres - Electrical installations
design, selection and erection) and IEC/EN 60079-17 (Explosive atmospheres. Electrical
installations inspection and maintenance).
•
The installer must comply with the technical data attached.
Date
2022-12-15
2023-10-10
2024-02-01
2024-06-03
6
Details
First release
Updated marking details
Added cable gland installation
details
Updated illustrations and
change of part number to
3086318 (old part number:
2939314)
Publicité
