Publicité
T40W IC / VHT446 IC
Translation of the original instructions
Vacuum Cleaner Parts and Labels
1.
Identification plate which includes:
Code of the Model, Class, Technical Specifications (see
table on page 6), Serial Number, EC Marking, Year of
Manufacture.
2.
Vacuum union hose
3.
Control panel
4.
Dust container
5.
Filtering chamber
6.
Discharge diffuser
7.
Panel power plate
Indicates that the panel is powered by the voltage
indicated on the data plate.
8.
Inlet
9.
Accessories compartment
10. Vacuum gauge
This vacuum cleaner creates a strong air flow which is drawn
in through the inlet (8) and blows out through the outlet (6).
Before turning the vacuum cleaner on, fit the vacuum hose
into the inlet and then fit the required tool on to the end part,
or connect it to the equipment from which the dust has to
be drawn. Refer to the manufacturer's accessory Catalog
or Service Center. After the hose and tools have been fitted,
make sure that the motor turns correctly.
This vacuum cleaner is equipped with an internal baffle
plate which subjects the vacuumed substances to a circular
centrifugal movement that makes them drop into the
container. The vacuum cleaner is equipped with a filter which
enables it to be used for the majority of applications.
Optional kits
Please contact the manufacturer's sales network for
information on optionals.
GB
Instructions for installing the options are included in the
conversion kit.
US
Use only supplied and authorised genuine spare parts.
C405
Vacuum cleaner description
Figure 1
WARNING!
Accessories
Various accessories are available; refer to the manufacturer's
accessory Catalog.
WARNING!
Use only genuine accessories supplied and authorised
by the manufacturer.
Packing and unpacking
Dispose of the packing materials in compliance with the laws
in force.
Model
A in. (mm)
T40W IC
47.2 (1200)
VHT446 IC
47.2 (1200)
Unpacking, moving, use and storage
Operate on flat, horizontal surfaces.
The load-bearing capacity of the surface the vacuum cleaner
is placed on must be suitable for bearing its weight).
Setting to work - connection to the power
supply
WARNING!
■ Make sure there is no evident sign of damage to
the vacuum cleaner before starting work.
■ Before plugging the vacuum cleaner into the
electrical mains, make sure the voltage rating
indicated on the data plate corresponds to that of
the electrical mains.
■ Plug the vacuum cleaner into a socket with a
correctly installed ground contact/connection.
Make sure that the vacuum cleaner is turned off.
■ The plugs and connectors of the power supply
cords must be protected against splashes of water.
■ Check that for proper connection to the electrical
mains.
■ Use the vacuum cleaners only when the cables
that connect to the electricity mains are in perfect
condition (damaged cables could lead to electric
shocks!).
■ Regularly check there are no signs of damage,
excessive wear, cracks or ageing on the electric
cable.
4
Figure 2
B in. (mm)
C in. (mm)
lbs (kg)
27.6 (700)
66.9 (1700)
390 (177)
27.6 (700)
66.9 (1700)
377 (171)
07/2014
Publicité
