Publicité
Cleaning and maintenance
Remove the stirrer attachment from the
mixer before cleaning the attachment and
the machine separately.
Wipe the mixer clean using a well-wrung
cloth after use, and always keep the
machine's surfaces and ventilation holes free
of dirt.
Never use corrosive or abrasive cleaning
agents, as they may attack the plastic
components.
Clean the stirrer attachments immediately
after use. Follow the instructions for
removing mixed material from the
attachment.
Please check regularly that the carbon
brushes are in good order. If the carbon
brushes are worn down, they must be
replaced.
Service centre
Note: Please quote the product model
number in connection with all inquiries.
The model number is shown on the front of
this manual and on the product rating plate.
For:
•
Complaints
•
Replacements parts
•
Returns
•
Guarantee issues
•
www.schou.com
Environmental information
Electrical and electronic equipment
(EEE) contains materials,
components and substances that
may be hazardous and harmful to
human health and the environment
if waste electrical and electronic equipment
(WEEE) is not disposed of correctly. Products
marked with a crossed-out wheeled bin are
electrical and electronic equipment. The
crossed-out wheeled bin indicates that waste
electrical and electronic equipment must
not be disposed of with unsorted household
waste, but must be collected separately.
Manufactured in P.R.C.
All rights reserved. The content of this manual may not
be reproduced, either in full or in part, in any way by
electronic or mechanical means, e.g. photocopying or
publication, translated or saved in an information storage
and retrieval system without written permission from
Schou Company A/S.
GB
37
Publicité
