Publicité
USING THE DEVICE
1. Place the device in a dry spot, on a flat, heat-resistant surface in a well-ventilated room.
2. Fully extend the cord and plug it into an electrical outlet. The device will emit a distinctive sound
signal and then enter standby mode.
3. Place cookware in the center of the heating plate, at the designated spot on the cooktop.
4. Press
, and then
5. Press
, and then use
1300W, 1600W, 1800W, 2000W, 2300W, 2500W, 2700W, 2900W, 3000W or press
and
to set the temperature. Choose between: 60°C, 80°C, 100°C, 120°C, 140°C, 160°C, 180°C,
200°C, 220°C, 240°C.
Tip: It is recommended to use the power adjustment function for cooking and the temperature
adjustment function for frying.
Caution: The temperature adjustment function and the power adjustment function of the device do not
interact with each other.
6. Press
, and then use
The time range is 5-180 minutes. To cancel the timer setting, turn off the device.
7. After finishing the operation, press
from the electrical outlet.
Additional information
The device will turn off automatically after about 120 minutes of inactivity, provided that the timer is not
previously set for more than 120 minutes.
Use only described below cookware:
Place steel, cast iron, made of enameled cast iron or stainless steel, flat-bottomed pots/pans/skillets
without edges or protrusions, with a diameter ranging from 12 to 22 cm, designed for use on the
induction hob.
to turn on the device.
and
to select the power level. Choose between: 500W, 800W, 1000W,
and
. Wait until the fan stops working, and then unplug the device
ENGLISH
to set the time after which the device will turn off.
29
, and then use
Publicité
